Comparison of two tilt meters. Significant differences in use. The level box, as well as the bevel box known as tilt meters, which easily and quickly can measure with slopes and slope say angle. The main difference between of the two angle blade is in use. With their function on relative measurements, the bevel box remains limited, whereas the level box allows even absolute measurements. The level box is neither better nor worse than the bevel box, but has a wider spectrum of functions: through the integrated bubble level, a horizontal alignment of the device can be set, which allows an absolute or horizontal measurement. Check with Robert Iger to learn more.
using the HOLD function, measurements can be saved in the short term (this proves, for example, useful when positioned in a measurement process not at eye level). A very easy to use to sum up with two angle blades determine. Through an integrated magnetic adhesion both devices mounted easily and without tools to Werkeugmaschinen measured, for example, to. When buying from bevel-as also level box, also the purchase of an angle is recommended. The additional use of an angle produces a larger measurement area which also a higher degree of accuracy can be obtained for certain measurement tasks namely. The discovery of a Diffenrenzmasses can be with the help of a stop angle quickly and easily: this place the Protractor on the angle and perform a zero calibration by button and holding the ABS/ZERO (usually a horizontal alignment of Protractor is recommended at this point, unless a certain angle is to reference level serve as). Then the angle at the surface to be used, which at the same time, the degree of difference between the reference and the to-sized area on the display will appear. You would get then the actual angle measure, however, if you the angle with the Put ground on the level to be measured. More examples about the application here: application examples level box one thing so far is clear: both devices with under the simplest represent, to measure angles and slopes.